Epson ELPMB44 Manual Del Usuario página 9

User's Guide
Attaching to the Projector
Attention
•
Do not remove screws for parts that are not specified in this guide.
•
Make sure the screws to secure the projector to this product, as well as the metal fittings to connect the top
and bottom frames are secured.
a
Attach the top frame to the projector.
Align the bolt holes on the top frame with the ceiling mount fixing points (four points).
Use a commercially available hexagon wrench to tighten the M6 x 30 mm bolts (with washers/spring
washers) supplied, and then secure the frame.
b
Attach the top frame to the bottom frame.
Align the Top Frame with the Bottom Frame, and rotate the metal fittings (four points) to secure them
in place.
8