Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. FAN button
Press this button, Auto, Low, Middle, High speed can be circularly selected. After powered on, Auto fan is not available for
this mode. When pressing AUTO button, the fan speed will not change.
AUTO
Low fan
Middle fan
High fan
Note: Under the Dry mode, the fan speed isn't adjustable, low fan speed is imperative, but when operating this button, the wireless adjustable, low fan speed is
imperative.
6.
button
Press this button turn on swing function; 4s later, press this button to turn off the swing and it will operate like that circularly.
Other air conditioners, press this button, to set up swing angle, which circularly changes as below:
OFF
This is an universal use remote controller. If remote controller sends the following three kinds of status that the swing status
of main unit will be:
When the guide louver start to swing up and down, if turn off the Swing, the air guide louver will stop at current position.
which indicates the guide louver swings up and down between that all five positions.

7. CLOCK button

Press this button, the clock can be set up, signal
blink and display. Within 5 seconds, the value can be adjusted by
pressing + or - button, if continuously press this button for 2 seconds above, in every 0.5 seconds, the value on ten place of
Minute will be increased
1. During blinking, repress the Clock button, signal
will be constantly displayed and denotes the setting succeeded.
After powered on, 12:00 is defaulted to display and signal
will be displayed. If there is signal
be displayed that
denotes the current time value is Clock value, otherwise is Timer value.
8. LED button
Press this button can turn on or turn off the LED light on the panel.
- 41 -

Publicidad

Tabla de contenido
loading

Tabla de contenido