Control Panel - Quipon GRH085DA-K3NA2B Manual De Usuario

Note: If the remote controller is missing, operate on the control panel.
6
1. ON/OFF button
Operation starts when pressing this button, and stops when pressing this button again.
2. LIGHT button
Press this button to turn on or turn off display light on indoor unit.
3. (+/-) button
Press the + button to increase the set(operating) temperature of the unit,and press the - button to decrease the set
(operating) temperature of the unit. the temperature setting range is from 16~30 °C℃ (61~86 °F).
4. FAN SPEED button
Select the fan speed LOW, MED, HIGH and TURBO in sequence.
5. MODE button
Select the operation mode, COOL,FAN, HEAT.
6. FILTER CHECK indicator
This feature is a reminder of cleaning the air filter(normal maintenance) for more efficient operation. The light will turn on
automatically after the fan works more than 250 hours.
If the light is on, turn off and power off the unit, take the air filter out and clean it, then re-install the air filter, power on and
turn on the unit, the light will still be on, press
+ button for 5s,the light will turn off.

CONTROL PANEL

temp.
ON/OFF
indicator
indicator
5 4
COOL
indicator
3 2
- 46 -
receiver window
HEAT
indicator
1