Timer On Button; Temp Button; Turbo Button - Quipon GRH085DA-K3NA2B Manual De Usuario

9. TIMER ON button

Timer On setting: Signal "ON" will blink and display, signal will conceal, the numerical section will become the timer
on setting status. During 5 seconds blink, by pressing + or - button to adjust the time value of numerical section, every press
of that button, the value will be increased or decreased 1 minute. Hold pressing + or - button, 2 seconds later, it quickly
change, the way of change is: During the initial 2.5 seconds, ten numbers change in the one place of minute, then the one
place is constant, ten numbers change in the tens place of minute at 2.5 seconds speed and carry. During 5s blink, press the
Timer button, the timer setting succeeds. The Timer On has been set up, repress the timer On button, the Timer On will be
canceled. Before setting the Timer, please adjust the Clock to the current actual time.

10. TEMP button

Press this button, could select displaying the indoor setting temperature or indoor ambient temperature. When the indoor
unit firstly power on it will display the setting temperature, if the temperature's displaying status is changed from other
status to
„ „, displays the ambient temperature, 5s later or within 5s, it receives other remote control signal that will return to
display the setting temperature. if the users haven't set up the temperature displaying status, that will display the setting
temperature. (This function is applicable to partial of models)
After powered on, the setting temperature displaying is defaulted, (according to cust- omers requirements to display, if
there is no requirement that will default to display the presetting temperature and there is no icon displayed on wireless
remote control). Press this button, (When displaying ), will display presetting temperature; (when displaying ) will
display indoor ambient temperature ,current displaying status will not be changed. If current displays indoor ambient
temperature, if received the other remote control signal, it will display presetting temperature, 5s later, will back to display
the ambient temperature.
(This function is applicable to partial of models)
11. TIMER OFF button
Once press this key to enter into TIMER OFF setup, in which case the TIMER OFF icon will blink.
The method of setting is the same as for TIMER ON.

12. TURBO button

In Cool or Heat mode, press this button can turn on or turn off the Turbo function. After turned on the Turbo function, its sig-
nal will be displayed. When switching the mode or changing fan speed, this function will be canceled automatically.
13. SLEEP button
Press this button, Sleep On and Sleep Off can be selected. After powered on, Sleep Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After Sleep function set up, the signal of Sleep will display.In this mode, the time of timer
can be adjusted. Under Fan and Auto modes, this function is not available.
- 42 -