LEGRAND 695 06 Manual De Instrucciones página 12

PROBLEME
The Learn indicator lights up for 5
seconds.
The Learn indicator lights up for 10
seconds.
During learning, the Learn indicator
light no longer blinks.
During learning, pressing on the
programmed command button does not
cause the Learn indicator light to blink
quickly.
When the scenario is saved, the Learn
indicator lights of certain receivers do
not go out.
CAUSE
Learning is impossible.
The number of memorized transmitters
is greater than 32.
Learning mode switches itself off after
10 minutes (if no action is taken).
After pressing the learn button, learning
of the Function button must be done
within the next minute.
Poor communication between products. Reduce the distance between the
12
SOLUTION
Install compatible products.
Delete unused scenarios.
Restart learning.
Restart learning.
transmitter and the receiver(s), then
restart learning or add a repeater.