Hilti SID 8-A18 Manual De Instrucciones Original página 15

Inserting the battery
WARNING
Risk of injury! Inadvertent starting of the impact screwdriver.
▶ Before fitting the battery, check that the cordless impact
screwdriver is switched off and that the forward/reverse
switch is in the middle position (i.e. safety lock engaged).
WARNING
Risk of injury! Hazard presented by a falling battery
▶ A falling battery may present a risk of injury to yourself and
others. Check that the battery is securely seated in the power
tool.
WARNING
Electrical hazards! Risk of short circuiting
▶ Before inserting the battery, check to ensure that the battery
terminals and the contacts in the impact screwdriver are free
from foreign objects.
Removing the battery
Inserting the accessory tool
CAUTION
Risk of injury! Hazard presented by a falling accessory tool.
▶ Use only accessory tools of the locking type, designed
specifically for impact screwdrivers.
▶ Before use, make sure that the accessory tool is correctly
fitted or positioned and securely engaged.
▶ Do not use worn or damaged accessory tools.
Removing the accessory tool
Setting forward or reverse rotation
Note
In the middle position, the forward / reverse selector switch
serves as a safety lock.
Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool
▶ A falling power tool may present a risk of injury to yourself
and others. Check that the belt hook is fitted securely before
beginning work.
Note
The belt hook allows the power tool to be attached to a belt
worn by the operator. The belt hook can be fitted to allow at-
tachment on the left or right side of the body.
Printed: 20.05.2015 | Doc-Nr: PUB / 5230969 / 000 / 00
2
3
4
5
6
7
9