Technical Features - Laica VT3112 Instrucciones Y Garantía

GB
English
The following spare part is available from your reseller: seals and sealing gasket:
code AHI006.

TECHNICAL FEATURES

Rated voltage:220V-240V ~ 50 Hz 90W
Air flow rate to the compressor: about 9 l/min.
Size: 370 (L) x 140 (P) x 74 (H) mm
Weight: about 1.3 kg
MAX. bag width: 300 mm
MAX vacuum level in the compressor: -750 mb
Device complying with the specific provisions of electric safety and electromagnetic
compatibility
The supplied bags are food grade
WWW.LAICAHEALTHCARE.RO
This product is meant for domestic use.
The conformity, certified by the CE-marking on the device, refers to the
EEC Directive 2004/108 on electromagnetic compatibility and to the EEC
Directive 2006/95 on electric material destined to be used within given voltage
limits.This product is an electronic device that was tested to assure, according to
the current technical knowledge, that it does not interfere with other nearby located
equipment (electromagnetic compatibility) and that it is safe if used according
to the advices given in the instructions for use. In case of operation anomalies,
do not keep using the device and, if necessary, refer to the manufacturer directly.
DISPOSAL PROCEDURE (DIR. 2002/96/EC - WEEE)
The symbol on the bottom of the device indicates the separated collection
of electric and electronic equipment. At the end of life of the device, do
not dispose it as mixed solid municipal waste, but dispose it referring
to a specific collection centre located in your area or returning it to the
distributor, when buying a new device of the same type to be used with
the same functions.
This procedure of separated collection of electric and electronic devices is carried
out forecasting a European environmental policy aiming at safeguarding, protecting
and improving environment quality, as well as avoiding potential effects on human
health due to the presence of hazardous substances in such equipment or to an
improper use of the same or of parts of the same.
VACUUM PACKAGING MACHINE
Caution! The wrong disposal of electric and electronic equipment may involve
sanctions.
WARRANTY
This equipment is covered by a 2-year warranty elapsing from the purchase date,
which has to be proven by means of the stamp or signature of the dealer
and by the fiscal payment receipt that shall be kept enclosed to this
document. This warranty period complies with the laws in force (Italian legislative
decree No. 24 dated Feb. 02, 2002 and following "Consumers' Act" Italian
legislative decree No. 206 dated Sep. 03, 2005) and applies only in case the
consumer is a private entity.
Laica products are designed for domestic use; therefore, their use in public
businesses is forbidden.
The warranty covers only production defects and is void, if the damage is caused
by accidental events, wrong use, negligence or improper use of the product. Use
the supplied accessories only; the use of other accessories may lead to warranty
voidness.
Do not open the equipment for any reason whatsoever; in case of opening or
tampering of the equipment, warranty decays definitively. Warranty does not apply
to parts subject to tear and wear along the use, as well as to batteries, when they
are standard supplied.
Warranty decays after 2 years from the purchase date. In this case, technical service
interventions will be carried out against payment. Information on technical service
interventions, under warranty terms or against payment, may be requested by
writing at info@laica.com. Nothing shall be owed for the repairing or replacement
of products covered by the warranty terms. In case of faults, refer to a dealer; DO
NOT send anything directly to LAICA. All interventions covered by warranty
(including product replacement or the replacement of any of its parts) shall not
be meant to extend the duration of the original warranty period of the replaced
product. The manufacturer cannot be made liable for any damages that may be
caused, directly or indirectly, to people, things and pets resulting from the
inobservance of the provisions contained in the suitable user manual, especially
with reference to the warnings related to installation, use and maintenance of the
equipment. Being constantly involved in improving its own products, Laica
reserves the right to modify its product, totally or partially, with reference to any
production need, without that this involves any responsibility whatsoever by Laica
or its dealers.
18
Instructions and warranty
TROUBLESHOOTING
PROBLEMS
The device does not work • Check that the plug is well inserted into the power supply outlet.
• The thermal protection has tripped: let the device cool down for at least 30 minutes and switch it on again.
The device does not create • The bag could have been pierced.
the complete vacuum in the Try to replace it with a new one.
bag
• Verify the correct position of the bag within the suction chamber.
• The sealing strip could have been overheated: this occurs when many sealing procedures are performed consecutively at very
short intervals; await some minutes to let the sealing strip cool down. Between one sealing and the following, we suggest to
await at least 60 seconds.
The bag does not keep the • Check that the bag is not pierced. Protect any pointed edge with pieces of paper serviettes.
vacuum condition after it has
been sealed • Check that along the sealing there are not impurities: crumbs, fat, etc. Re-open the bag and try again to perform the sealing.
The bag melts and is not • Make sure that the inner part of the bag is clean and that it is well stretched.
sealed in the right way
English
TROUBLESHOOTING
19
GB