Testboy TB 312 Manual De Instrucciones página 48

Operation
Connect the multimeter to a USB port on your PC and hold
down the "HOLD" button until "PCLINK" appears on the display.
If the driver is not installed automatically, open the "drivers"
folder on the CD
Run the xxxInstaller.exe in the appropriate folder of your operat-
ing system.
The following operating systems are supported: Windows 2000,
XP, 2003, Vista and Windows 7.
Once the drivers have been installed successfully, a virtual
COM port is generated. Please refer to the device manager for
the assigned COM port (COM2, COM3, etc).
Configure this COM port in the program's main window (top left)
and press "Connection".
Depending on where the rotary selector switch is positioned on
the multimeter, you will see a copy of the display in the top left
section of the main window, with an XY plot beneath it, and on
the right-hand side the data is transferred to a list that you can
then easily save, transfer to EXCEL or print.
48
®
Testboy TB 312