Specifications; Staple Selection - Metabo HPT N 5008AC2 Instrucciones Y Manual De Seguridad

English

SPECIFICATIONS

Operating pressure
Dimensions
Length × Height × Width
Weight
Staple capacity
Air consumption

STAPLE SELECTION

Be sure to use only the genuine metabo HPT staples for the N5008AC2, N5010A. The use of any other
staples can result in tool malfunction and/or staple breakdown, leading to serious injuries.
Only staples shown in the Table below can be driven with this Stapler.
16 Gauge 7/16" Crown staple
16 Gauge 1/2" Crown staple
10
000Book_N5008AC2_US_metabo.indb 10 000Book_N5008AC2_US_metabo.indb 10
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
14-3/8" × 10-5/32" × 3"
(365 mm × 258 mm × 76 mm)
.040 ft
(1.1 ltr/cycle at 6.9 bar)
(1.1 ltr/cycle at 7 kgf/cm
WARNING
Dimensions of staples for N5008AC2
Min.
.057"
.309"
(1.45 mm)
(7.9 mm)
Dimensions of staples for N5010A
Min.
.052"
.386"
(1.33 mm)
(9.8 mm)
)
2
4.4 lbs. (2.0 kg)
150 Staples
/cycle at 100 psi
3
)
2
Max.
Max.
2018/03/19 16:30:27 2018/03/19 16:30:27