Special Safety Instructions For The Device - Grizzly Tools AHS 2020-52 Li Traducción Del Manual De Instrucciones Original

found in the separate operating
instructions.
• Ambient temperature range for using the
power tool and battery:
-20 °C - 45 °C
• Ambient temperature range for storing the
power tool and battery:
0 °C - 45 °C
• Ambient temperature range for the
charging system during charging:
4°C - 40°C
Special safety instructions for
the device
1) SAFETY INSTRUCTIONS FOR
HEDGE TRIMMERS:
a) Keep all body parts away from the
blade. Do not attempt to remove
clippings or to hold onto material to
be cut when the blade is running.
The blades continue to move after
turning off the switch. A moment of
inattention when using the trimmer can
result in serious injuries.
b) Hold the hedge trimmer by the
handle when the blade is at a stand-
still and do not place your fingers
near the power switch. Carrying the
hedge trimmer correctly reduces the
risk of inadvertent operation and being
injured by the blade as a result.
c) Always place the protective cover
onto the blades while transporting
or storing the hedge trimmer. Care-
ful handling of the hedge trimmer redu-
ces the risk of injury from the blade.
d) Make sure that all power switches
are switched off and the battery
block is removed or disconnected
when removing trapped clippings
or carrying out maintenance work.
Inadvertently switching on the hedge
trimmer while removing trapped clip-
pings or during maintenance can
cause serious injuries.
e) Hold the hedge trimmer only by the
insulated gripping surfaces as the
blade may come into contact with
concealed power lines. If the blades
come into contact with a live wire this
may cause a charge in metal parts and
result in an electric shock.
f) Keep all cables and lines away from
the cutting range. Cables and lines may
be concealed in hedges and bushes and
be inadvertently cut by the blade.
g) Do not use the hedge trimmer in
bad weather, especially if there is a
danger of lightning. This reduces the
risk of a lightning strike
h) Before the work, search the hedge
for concealed objects, e.g. cable
etc. In this way you avoid damage to
the appliance
i) Hold the hedge trimmer correctly,
e.g. with both hands on the han-
dles, if there are two handles. Loss
of control of the equipment may result
in injuries.
j) Wear suitable clothing and work
clothes when working with the
equipment. Do not hold the equip-
ment by the cutting blade or lift it
on the cutting blade. Contact with
the cutting blade can cause injuries.
• The hedge trimmer is intended for
work during which the user stands
on the ground and not on a ladder or
other unstable surface.
• The user is advised to ensure before
use of the hedge trimmer that the lo-
cking mechanism(s) of all moving parts
(e.g. the extended shaft and the pivo-
ting elements), where present, is/are in
the locking position.
GB
69