Grizzly Tools AHS 2020-52 Li Traducción Del Manual De Instrucciones Original página 68

GB
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in un-
expected situations.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in charg-
ers that are recommended by the
manufacturer. Risk of fire if a charger
that is suitable for a specific type of
battery is used with other batteries.
b) In the power tools, use only the
batteries designed for the purpose.
The use of other batteries may result
in injuries and risk of fire.
c) Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging
of the contacts. A short circuit be-
tween the battery contacts may cause
burns or fire.
68
d) If used incorrectly, liquid may leak
from the battery. Avoid contact
with this. In the event of accidental
contact, rinse off with water. If the
liquid gets into eyes, seek medical
assistance. Leaking battery fluid may
cause skin irritations or burns.
e) Do not use damaged or altered bat-
teries. Damaged or altered batteries
can be unpredictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to fire or
elevated temperatures. Fire or tem-
peratures over 130 °C can cause an
explosion.
g) Follow all instructions for charging
and never charge the battery or the
battery-powered tool outside the
temperature range stated in the op-
erating instructions. Incorrect charg-
ing or charging outside the permitted
temperature range may destroy the
battery and increase the risk of fire.
6) SERVICE
a) Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
b) Never repair damaged batteries.
All battery repairs should be carried
out by the manufacturer or authorised
customer service centres only.
Attention! Observe the safety
information and notes on char-
ging and proper use as shown
in the instruction manual for
your Grizzly Tools battery and
charger. A detailed descrip-
tion of the charging process
and further information can be