Using The Master Volume Control; Muting A Channel; Muting Channel Effects - Bose T4S ToneMatch Guia Del Propietario

Operation

Using the Master Volume Control

The Master volume control adjusts the overall output level of the T4S/T8S ToneMatch® output and analog
Master output. During normal operation, it is recommended to keep the Master control set at the 12 o'clock
position. Once you have set volume levels for all channels, you can adjust the Master volume up or down from
this position.

Muting a Channel

The Mute buttons silence the audio for the respective channel.
• To mute a channel, press the Mute button once. The Mute button glows white to indicate that the channel is
muted. "CH MUTE" will appear on the display for the respective channel.
• Press the Mute button again to unmute the channel. The Mute button dims to indicate that the channel is not
muted.

Muting Channel Effects

The FX Mute buttons mute only the Mod, Delay, and Reverb effects on the respective channel. Muting effects
does not bypass ToneMatch presets, zEQ, Para EQ, and Comp/Gate settings.
• To mute effects on a channel, press the FX Mute button once. The FX Mute button glows white to indicate
that the channel effects are muted. "FX MUTE" will appear on the display for the respective channel.
• Press the FX Mute button again to unmute the channel effects. The FX Mute button dims to indicate that the
channel effects are not muted.
18 - English
Ch 1 ToneMatch
Utility
CH MUTE
Flat
Preset
Category
Ch 1 ToneMatch
Utility
FX MUTE
Flat
Preset
Category