Adjusting Para Eq; Using Compressor/Gate Functions - Bose T4S ToneMatch Guia Del Propietario

Ocultar thumbs Ver también para T4S ToneMatch:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

Adjusting Para EQ

The Para EQ function provides three parametric equalizations centered on a user-specified frequency within
the range of 50 Hz to 16 kHz.
Note: To bypass the Para EQ settings, press the Select control. Press it again to activate.
1.
Press or rotate the Select control and select Para EQ band 1-3.
Rotate the Level control to adjust the boost/cut level from -15 dB to +15 dB.
2.
3.
Rotate the Freq control to adjust the center frequency from 50 Hz to 16 kHz.
4.
Press the Freq control to switch to Width. Rotate the Width control to adjust the width of the bell curve
around the center frequency from 0.20 octave to 5.00 octave.

Using Compressor/Gate Functions

The Comp/Gate function provides access to gate, compression, limiter, de-esser and kick drum presets with
adjustable parameters.
Note: To bypass the Comp/Gate settings, press the Type control. Press it again to activate.
Note: Only one effect per channel.
1.
Rotate the Type control to access the list of Comp/Gate effects and highlight your choice:
A.
Compressor 1: Light – Compressor featuring a preset low-compression ratio with variable threshold
and gain parameters. Works well as a general-purpose compressor for most instruments and
microphones that require minimal level control.
B.
Compressor 2: Medium – Compressor featuring a preset moderate compression ratio with variable
threshold and gain parameters. Works well with basses, guitars, keyboards, and vocals requiring
subtle level control.
C.
Compressor 3: Heavy – Compressor featuring a preset high compression ratio with variable threshold
and gain parameters. Works well with loud instruments (like horns and drums), as well as strong
vocals that require more aggressive level control.
D.
Limiter – Hard limiter featuring a preset ratio (∞:1) with variable threshold and gain parameters. Works
well with very loud instruments, such as drums, to prevent signal peaks from overloading the channel.
Ch 1
Parametric EQ
B3
Width
Select
Level
Freq
PEQ 1
-3.4dB
250.0Hz
Ch 1
Comp/Gate
Ramp
Type
Thresh
Speed
Gate
-80.0dB
50%
Operation
English - 23

Publicidad

Tabla de contenido
loading

Productos relacionados para Bose T4S ToneMatch

Este manual también es adecuado para:

T8s tonematch

Tabla de contenido