Connection Panel - Bose T4S ToneMatch Guia Del Propietario

Connection Panel

Figure 4. T8S Connection Panel
q w
M
o
q POWER SWITCH – Turns the mixer on or off.
w USB 2.0 TYPE-B – A USB interface that allows you to connect the mixer to your computer.
e USB 2.0 TYPE-A – A USB interface that allows you to stream audio from your flash drive.
r ANALOG L/R OUTPUT – Main analog output. Accepts 1/4" TRS balanced and TS unbalanced cables.
t AUX OUTPUT – Four user-definable analog outputs. Can be configured for a pre-fader, post-EQ, and
effects, or post-fader output. Accepts 1/4" TRS balanced or TS unbalanced cables.
y AUX IN – Analog input channels 9/10. Accepts 1/4" TRS balanced or TS unbalanced cables for line-level
inputs. Can be used for stereo input signals.
u INPUTS 1-8 – Analog input channels 1-8. Accepts XLR balanced cables for microphones or 1/4" TRS balanced
or TS unbalanced cables for high-impedance inputs, such as guitars.
i XLR STEREO OUTPUT – Stereo analog output. Accepts XLR balanced cables for stereo output.
o DIGITAL POWER PORT – For use w/ ToneMatch power supply (see "Connecting the ToneMatch® Power
Supply" on page 14).
Note: The T8S is NOT designed to connect digitally to the L1® Model 1S/II.
CAUTION: Although the ToneMatch port accepts a standard RJ-45 connector, do NOT connect the T8S
to a computer or phone network.
e r
USB AUDIO
MONO
MAIN OUT
i
Control and Connection Panels
t
u
y
English - 9