Installation; Lifting Instructions; Connecting To Mains - ESAB Origo Arc 410c Instrucciones De Uso

GB
5

INSTALLATION

The installation must be executed by a professional.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user's responsibility to take adequate precautions.

Lifting instructions

The power supply should be lifted by means of its lifting eye. The handle is only intended for pulling
it along the ground.
Check that the welding rectifier is configured for the available mains supply
S
before connecting it to the mains.
See Connecting to mains for cable rating and fuse rating.
S
Connect the mains cable to the rectifier according to the relevant regulations and
S
install a suitable fuse in the main fuse box.
Make sure the welding rectifier is not covered or positioned so that cooling is
S
obstructed.
5.1

Connecting to mains

Arce
- - 7 - -