Human Touch CERTUS Manual De Uso Y Cuidado página 8

Install the tablet holder
1. Place the tablet holder into position with the flat side
facing forward, then lower the holder into the bracket
(Fig.14).
2. Place the tablet into the holder with the cord centered
in the bracket (Fig.15).
Install the body pad
1. Flip the top layer of the body pad (softening pad) up and over the
backrest (Fig.16).
humantouch.com
Fig.14
Cord
Fig.15
Fig.16
12
2. On the left-hand side of the chair frame, connect the white
hose to the upper pad fitting and the black hose to the lower
pad fitting (Fig.17).
Upper pad fitting
White hose
Lower pad fitting
Black hose
3. Connect the heat cable on the left-hand side of the
chair frame to the corresponding cable on the lower
left-hand side of the body pad (you will hear it snap
when it connects), then pull the protective casing
over the connection to secure it (Fig.18).
4. On the right-hand side of the chair, connect the
white hose to the upper pad fitting and the black
hose to the lower pad fitting.
5. Zip both sides of the body pad to the chair; the
zippers start at the top of the backrest (Fig.19).
Fig.17
Fig.17
Heat cable
Fig.18
Fig.19
13