Snapper XD ESXD82ZPS Manual De Utilización página 15

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
Motor running, Motor stops after about 3
but cutting seconds.
abnormal
When using the pole saw
under load, it stops.
Battery is not charged.
Lack of bar and chain
lubricant can cause
increased friction. Chain
needs to be properly
maintained.
Incorrect battery storage
temperature.
English (original instructions)
Recharge the battery.
Release trigger. Restart the pole saw. Do not
force the pole saw. Refer to the manual for
proper use.
Charge the battery. Refer to the battery
and charger manual for correct charging
procedures.
Make sure the pole saw always has bar and
chain lubricant.
Allow the battery pack to cool until the
temperature drops to room temperature.
14