Philips sonicare AirFloss Ultra Manual Del Usuario página 8

8
English
Your Philips AirFloss Ultra (Fig. 1)
1 Nozzle tip
2 AirFloss Ultra nozzle
3 Activation button
4 Reservoir and reservoir door
5 Handle
6 Charge & burst mode indicators
-
Single burst: 1 LED
-
Double burst: 2 LEDs
-
Triple burst: 3 LEDs
7 Power/mode button
8 Removable nozzle holder (select models)
9 Charger
Note: The contents of the box may very based on the model
purchased.
Charging
Charge the AirFloss Ultra for 24 hours before first use.
1 Put the plug of the charger in the electrical outlet.
2 Place the handle on the charger. (Fig. 2)
Charging process: (Fig. 3)
-
1 green LED: 33% charged.
-
2 green LEDs: 66% charged.
-
3 green LEDs: 100% charged.
Note: When it is fully charged, AirFloss Ultra has an operating time of
up to 11 days when it is used in triple burst mode, and up to 33 days
when it is used in single burst mode.
Note: When the charge indicators flash yellow, the battery is low and
needs to be recharged (fewer than 3 uses left).
35_021_2143_1_Booklet_A6_v3.indd 8 09/08/16 09:52