Child Safety; Service And Repair - Saivod VS1210B Manual Del Usuario

1. Place the hook into the slot way
2. Whirl the filter according to arrow instruction to place the hook in the slot
3. Please clean the filter regularly
CAUTION
CONDENSATION INSIDE THE CAVITY / GLASS SURFACE
During normal operation, condensation may accumulate in the lower cavity due to the high relative
humidity of the surrounding environment. This condensation should be wiped away with a clean dry
towel.

CHILD SAFETY

To avoid risk of injury of entrapment, the unit door should be removed.
When the product is not in use. Never allow children to operate, play with or crawl inside the appliance.

SERVICE AND REPAIR

Do not attempt to service or repair any internal element of the unit, or its power supply cord. If the
supply cord is damaged, it must be replaced by the supplier, its service agent or similarly qualified
persons in order to avoid a hazard.
BOTTLE COOLER FEATURES & USE
Temperature Adjustments:
Your bottle cooler has Touch screen control on the front of the unit. You can set the temperature of
your bottle cooler at any setting you desire. The temperature will range from 4℃ to 22℃. When initially
turned on, the LED will show the cavity temperature. And the default setting at 10℃. The LED will then
display the internal temperature.
NOTE: White wine temperature is cooler than red wine temperature.
By touching the (+) temperature button on the display you can increase the temperature and touching
the (-) temperature button will lower the temperature. Your bottle cooler also has a light for you viewing
pleasure. A light switch on the control panel will activate the light manually. Under normal operation it
is best for the light to remain off.
Please note that the actual cabinet temperature in a thermal electric unit is dependent on the ambient
temperature. You may set the cabinet temperature within range but the unit may not reach the preset
temperature.
For this model when the ambient temperature is 25℃, the lowest temperature that can be reached is
11℃. When ambient temperature is 21℃, the cabinet temperature can reach approximately 7℃.
Note: The display temperature is from 0℃ to 70℃. thus when the bottle cooler is installed if the ambient
temperature is higher than 70℃ or lower than 0℃, the display will show "--" until the cabinet has
cooled down to 70℃ or warmed up to 0℃. When the bottle cooler is started the temperature display will
show the ambi ent temperature.
When the ambient temperature is below the pre-set temperature, the bottle cooler will not operate until
the ambient temperature increase to higher than the pre-set temperature.
28
VS1210b.indd 28 8/25/2016 2:45:18 PM