Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The actual cabinet temperature maybe affected by the ambient temperature. Should the temperature
difference between the pre-set temperature and the ambient temperature is bigger than the maximum
temperature performance of this appliance, the cabinet may not achieve the pre-set temperature.
PROPER BOTTLE COOLER CARE AND CLEANING
Cleaning and Maintenance
WARNING: To avoid electric shock always unplug your bottle cooler before cleaning. Ignoring this
warning may result in death or injury.
CAUTION: Before using cleaning products, always read and follow manufacturer's instructions and
warnings to avoid personal injury or product damage.
GENERAL: Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use
sponge or soft cloth, dampened with the cleaning solution, to wipe down your bottle cooler.
Rinse with clean warm water and dry with a soft cloth.
Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may dissolve damage and/or discolor your bottle cooler.
POWER INTERRUPTIONS
Occasionally there may be power interruptions due to thunderstorms or other causes. Remove the
power cord from AC outlet when a power outage occurs. When power has been restored, replug power
cord to AC outlet.
VACATION AND MOVING CARE
For long vacations or absences, unplug the unit, empty contents from bottle cooler, and clean the bottle
cooler and door gaskets according to "General clean ing" section. Prop doors open, so air can circulate
inside. When moving always move the bottle cooler vertically. Do not move the unit lying on its side.
TROUBLESHOOTING
Defect
The
appliance
does
not
function.
The
appliance
vibrates
and
shudders.
The appliance is
not cooling.
VS1210b.indd 29
Cause
• The plug is not connected with
mains power.
• The power socket is defective.
• The appliance is defective.
The appliance is standing on an
uneven surface.
• The time passed is not yet
sufficient to achieve the desired
temperature.
• The temperature is incorrectly
programmed.
• The location is unsuitable.
• There are a lot of bottles in the
bottle cooler cabinet.
Solution
• Insert the power plug into wall socket.
•Use a different wall power socket.
•In this case, contact Customer Services.
Take steps to obtain a firm positioning by
calibrating the adjustment feet .
• Wait for a short period.
• Check the programmed
temperature.
• Place the appliance at a cooler
location.
• The appliance needs longer to
cool down.
GB
29
8/25/2016 2:45:19 PM
Publicidad
Tabla de contenido
