I Ensure that the power cable never becomes wet
during operation.
I Unplug the appliance immediately after use.
The appliance is free of electricity only when you
remove the plug from the mains power socket.
I Do not open the housing or attempt to repair the
appliance yourself. Should you do so, device
safety can no longer be assured and the warran-
ty will become void.
Risk of fire!
I Do not use the appliance in the vicinity of hot
surfaces.
I Do not place the appliance at locations exposed
to direct sunlight.
This could lead to overheating and cause irrepa-
rable damage.
I Do not leave the appliance unattended when in
use.
I NEVER cover the ventilation slits on the top of
the appliance while it is switched on.
Risk of injury!
I Keep children away from the connecting cable and
the appliance. Children frequently underestimate
the dangers of electrical devices.
I Ensure that the appliance stands with a safe and
secure positioning.
I Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance
to be checked and, if necessary, repaired by a
qualified expert.
I Some parts of the appliance become very hot
during operation. To avoid burns, do not touch
these parts.
Suitable laminating pouches
• For hot lamination you can use pouches with a
width of up to 320 mm and a maximum thickness
of 125 micron.
• Please note that each laminating pouch may only
be used once.
For hot lamination, use only laminating
pouches that are expressly designated
for hot lamination.
For cold lamination, use only laminating
pouches that are expressly designated
for cold lamination.
Take note that the laminating pouches
included with the laminator are intended
exclusively for hot lamination.
Operating levels
Position of
selector
switch
i
HOT
HOT
COLD
Tip: For high-gloss photos, you should select
the switch position "125" as well as the
appropriate pouch thickness.
- 14 -
Position of
Laminating
foil thickness
switch
o
thickness
80
> 60 - 80
125
85 - 125
125
to 200
foil