Appliance Description; Handling And Operation; Suitable Laminating Pouches; Switching Levels - UNITED OFFICE ULG 350 B1 Instrucciones De Uso

Appliance description

Pouch slot for manual pouch insertion
Power indicator light (appliance switched on)
2
3
Ready indicator light (ready for use)
Anti-blocking switch and pouch thickness switch
4
On/Off switch (ON/OFF)
5
Selector switch for hot and cold lamination (HOT/COLD)
6
Pouch ejector slot

Handling and operation

In this chapter you will receive important information about the handling and
operation of the appliance.

Suitable laminating pouches

For hot lamination you can use pouches with a width of up to 230 mm and a
maximum thickness of 125 micron. For cold lamination you can use pouches with
a maximum thickness of 200 microns. Please note that each laminating pouch
may only be used once.
NOTICE
► For hot lamination, use only laminating pouches that are expressly
intended for hot lamination.
► For cold lamination, use only laminating pouches that are expressly
intended for cold lamination.
► Take note that the laminating pouches supplied with the laminator are
intended exclusively for hot lamination.

Switching levels

Selector switch
position
NOTICE
► For high-gloss photos, you should select the switch position "125" as well
as the appropriate pouch thickness.
ULG 350 B1
Pouch thickness
switch position
6
Hot
Hot
Cold
Laminating pouch
4
80
125
125
thickness
> 60 - 80
85 - 125
to 200
GB │ IE │
21 ■