DESCRIPTION
1 Keyless chuck
2 Torque adjustment ring.
3 Cooling vents
4 Soft grip
5 Power light
6 Forward/reverse switch
7 On / Off / speed adjustment switch
8 Battery release button
9 Battery
10 Battery indicator level
11 Charger
12 Charger jack
13 Female charger connector
14 Function Selector Ring *
15 Mechanical speed selector *
(*) Only available in the model VPLI12M-2
If the model of your appliance does not have the accessories des-
cribed above, they can also be bought separately from the Technical
Assistance Service.
CHARGING THE BATTERY
- Caution: A new battery is not fully charged and must therefore be
charged before the appliance is used for the first time.
- Caution: During the handling of batteries, do not touch both poles
at the same time, as this will provoke the partial discharge of the
stocked energy therefore affecting longevity.
- Charge the battery at an atmospheric temperature of 4 and 40ºC.
- When the battery is empty, the appliance is switched off by means
of a protective circuit. The inserted tool no longer rotates.
- Plug the charger (11) into the mains. And the green pilot light will turn on
- Remove the battery (9) from the appliance by pressing the battery
unlocking button (8) and pulling the battery out of the appliance
- Connect the charger jack (12) to the socket (13) of the battery.
- The green pilot light will turn off and the red pilot will turn on to
indicate that the battery is under charging process.