Preparation - Kobalt KDS 124B-03 Manual Del Usuario

SAFETY INFORMATION
• Secure the workpiece. Clamping devices or a vise will hold the workpiece in place better
and more safely than holding it by hand.
• Always wait until the tool has come to a complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power tool.
• Before performing any kind of work on the tool (e.g., maintenance, tool change, etc.), as well
as when transporting and storing it, always set the rotational direction switch to the center
(locked) position. Unintentional activation of the On/Off switch may result in personal injury.
• When working with the power tool, always hold it firmly with both hands and provide a
secure stance. The power tool is guided more securely with both hands.

PREPARATION

Know Your Drywall Screwgun
This drywall screwgun can be used to attach drywall, chipboard, or fiberboard onto wood or
sheet metal with drywall screws.
Before attempting to use the drywall screwgun, familiarize yourself with all of its operating
features and safety requirements.
WARNING
• Do not allow familiarity with the screwgun to cause carelessness. Remember that one
careless moment is enough to cause severe injury. Before attempting to use any tool, be
sure to become familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this
tool. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
8