Troubleshooting - Gardena 1867 Instrucciones De Empleo

Sensor de humedad
Ocultar thumbs Ver también para 1867:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
5. MAINTENANCE
To clean / replace the sensor tip [ Fig. M1 ]:
Whenever the Sensor is relocated, the sensor tip should be cleaned /
replaced. The felt on the tip should not come into contact with grease / oil.
(9)
v Clean the sensor tip
with clear water.
6. STORAGE
To put into storage:
The product must be stored away from children.
1. Remove the batteries to preserve them (see 3. INITIAL OPERATION).
2. Store the Sensor in a dry, enclosed and frost-free place.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal household waste.
It must be disposed of in line with local environmental regulations.

7. TROUBLESHOOTING

Problem
Watering is switched on
although soil is damp
16
1867-20.960.01.indb 16
If the felt becomes damaged, the sensor tip can be re-ordered from GARDENA
Service.
v Unscrew the sensor tip
To clean the sensor:
No caustic / abrasive cleaning agents should be used.
v Clean the sensor with a damp cloth (do not use solvent).
IMPORTANT!
v Dispose of the product through or via your municipal recycling collection
centre.
Disposal of the batteries:
The batteries may only be disposed of when discharged.
IMPORTANT!
v Dispose of the batteries through or via your municipal recycling collection
centre.
Possible Cause
Sensor is not positioned in the watering area.
Switching point is selected too damp.
(9)
and screw on the new sensor tip.
Remedy
v Position the sensor in the watering area.
v Select the switching point "dryer".
16.11.20 09:08

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido