Maintenance; Storage - Gardena 1889 Instrucciones De Empleo

Factory Reset [ Fig. I1 / F1 ]:
The Water Control Bluetooth
settings.
(B)
1. Remove the battery
2. Push and hold the Man. Button
(B)
battery in the battery compartment
polarity + / –).

5. MAINTENANCE

To clean the filter [ Fig. M1 ]:
(12)
The filter should be checked regularly and cleaned when
necessary.
To clean the Water Control:
DANGER! Risk of physical injury!
Risk of injury and risk of damage to the
product.

6. STORAGE

To put into storage:
The product must be stored away from children.
1. Remove the battery to preserve it
(see 3. Initial Operation).
2. Store the Water Control in a dry, enclosed and frost-free
place.
18
1889-20.960.01.indb 18
will be reset to the factory
®
.
(4)
and place the
(7)
(note the
3. Push and hold the Man. Button
10 seconds.
After approx. 10 seconds the factory setting is restored
and the connection LED is flashing.
v Do not clean the product with water or with
a water jet (in particular high-pressure water
jet).
v Do not clean with chemicals including petrol
or solvents. Some can destroy critical plastic
parts.
v Clean the Water Control with a soft, damp cloth.
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal
household waste. It must be disposed of in line with
local environmental regulations.
(4)
for another
18.01.21 16:03