VOX Amplification VX50 BA Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2
1
1.
DC 19V jack
Connect the included AC adapter to this jack.
The AC adapter is designed specifically for the VX50 BA. Do not
use any other adapter, otherwise a malfunction may occur.
2.
Cord hook
Wrap the AC adapter cord around this hook to prevent the AC
adapter from being accidentally disconnected.
3.
DIRECT OUT jack
Connect your tuner or PA system to this jack. It will output the un-
modified sound of the instrument that's connected to the INPUT
jack.
Using a TRS plug will produce an impedance-balanced output and
reduce noise.
A TS plug can also be used; however, in this case, the output
will be unbalanced.
The equalizer knobs, GAIN knob and MASTER knob do not
affect the output.
4.
INPUT jack
Connect your bass guitar to this jack.
5.
GAIN knob
Use this knob to adjust the amount of input gain in the pre-amp.
6.
COMP switch
This switch enables the compressor circuit. This circuit adds com-
pression and sustain to the sound.
Tip
If the DRIVE switch and COMP switch are both set to ON, an
overdrive sound will be mixed with a clean, compressed bass
sound. This combination creates a uniquely distorted sound
with plenty of bass response.
The power amp limiter does not turn off, even when the COMP
switch is set to OFF.
7.
DRIVE switch
Use this switch to engage the overdrive circuit.
8.
Equalizer
BASS knob
Boosts or cuts the amount of low range frequencies in your sound.
LO MID knob
Boosts or cuts the amount of lower mid-range frequencies in your
sound.
HI MID knob
Boosts or cuts the amount of higher mid-range frequencies in your
sound.
TREBLE knob
Boosts or cuts the amount of high range frequencies in your sound.
Panel description and functions
3
9.
Use this knob to adjust the overall volume level of the VX50 BA.
Tip
10.
Press the
turns on. To turn off the amp, hold down the
power indicator turns off.
11.
Connect the analog audio outputs from your audio devices to this
jack. This jack is stereo mini jack.
12.
Use this jack when you want to use headphones. Adjust the output
level from this jack by using the MASTER knob.
7
4
5
8
7
6
MASTER knob
The power amp section of the VX50 BA is equipped with a
limiter. Playing with the MASTER knob turned up will create
a compressed sound and keep it clean.
button, power indicator
button until the power indicator lights up and the amp
AUX IN jack
The MASTER knob and the equalizer do not affect the sound of
a device connected to the AUX IN jack.
jack
When a device is connected to this jack, no sound will be output
from the internal speaker.
Be sure to connect a stereo mini plug to this jack.
9
10
11 12
button until the

Publicidad

Tabla de contenido
loading

Tabla de contenido