Sauder Craft Pro 417047 Manual Del Usuario página 10

Step 6
Carefully stand your unit upright.
å
Insert four HIDDEN CAMS (2) into the large holes in the
å
BACK DIVIDERS (L) as shown in the right diagram.
NOTE: The arrow in the HIDDEN CAM must point toward
å
the hole in the edge of the board.
Insert two WOOD DOWELS (3) into the holes in the BACK (C).
å
Fasten the BACK DIVIDERS (L) to the BACK (C). Tighten
å
two HIDDEN CAMS (2).
NOTE: Be sure the WOOD DOWELS in the BACK insert
å
into the holes in the BACK DIVIDERS.
1
2
The arrow must point
toward the hole in the
edge of the board.
Page 10
2
3
2
C
www.sauder.com
Arrow
L
L
2
L
L
3
Arrow
417047