Sauder Craft Pro 417047 Manual Del Usuario página 8

Step 4
Insert two HIDDEN CAMS (2) into the large holes in the
å
TRAY BACK (C) near the edge of the indicated arrow.
NOTE: The arrow in the HIDDEN CAM must point toward
å
the hole in the edge of the board.
Fasten the BACK (C) to the TRAY BOTTOM (D). Tighten
å
two HIDDEN CAMS.
Page 8
The indicated arrow on
the BACK (C) should
point toward the TRAY
BOTTOM (D).
D
www.sauder.com
1
2
The arrow must point
toward the hole in the
edge of the board.
Arrow
2
C
2
3
417047