Complete The Installation; Care And Cleaning - Kohler K-76732 Guía De Instalación Y Cuidado

3. Complete the Installation

Install the remaining trim edge and corner assembly onto the
showerhead panel by sliding it into the trim edges on each side.
IMPORTANT! Make sure that the groove in each trim corner lines
up with the guide inside the trim edge.
Using the provided 5/64" hex wrench, install a setscrew into each
end of each trim edge.

Care and Cleaning

For best results, keep the following in mind when caring for your
KOHLER product:
• Use a mild detergent such as liquid dishwashing soap and warm
water for cleaning. Do not use abrasive cleaners that may scratch
or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is
safe for use on the material.
Kohler Co. 5 1271630-2-A