Turbosound TCS Passive Serie Guia De Inicio Rapido página 6

10 TCS Passive series
Amplifi er Considerations
The TCS series loudspeakers are optimised for use with the TURBOSOUND T series amplifi ers with the LMS series controllers. A full range of DSP settings to suit
any confi guration are provided for download on the TURBOSOUND website. The use of third party amplifi cation and processing is only advised using the matrix of
manual settings as well as the limiter calculator provided on the TURBOSOUND website. The TCS series loudspeaker enclosures should be driven by high quality power
amplifi ers designed for true professional use. Power amplifi ers should be capable of delivering long term broadband power equal to half the loudspeaker's peak
power rating at its stated nominal impedance. The use of underpowered amplifi ers must be avoided as heavily clipped signals can cause permanent loudspeaker
damage. Limiters, crossovers and equalisation points must be set in accordance with the settings provided on the TURBOSOUND website. This will ensure the optimum
sound quality and long-term reliability as well as protection from damage.
Neutrik speakON* NL4 locking input connector(s) and 4-way barrier strip(s) are provided, allowing options for input and
link, passive, bi-amp, parallel and discrete operation.
Recommended Minimum Amplifi er Power
Model TCS62 TCS122
Mode Passive Passive Bi-amp LF Bi-amp LF
Impedance 8 Ohms 8 Ohms 8 Ohms 6 Ohms
Continuous
Minimum
175 W 600 W 600 W 75 W
RMS
Amplifi er
Power
Peak 700 W 2400 W 2400 W 750 W
TCS152 TCS110B TCS212B TCS115B
Passive Bi-amp LF Bi-amp HF Passive Passive Passive
8 Ohms 8 Ohms 6 Ohms 8 Ohms 4 Ohms 8 Ohms
600 W 600 W 75 W 300 W 800 W 500 W
2400 W 2400 W 750 W 1200 W 3200 W 2000 W
Connections
TCS62
Mode Back Panel
Passive Only
TCS218B
Passive
4 Ohms
1600 W
TCS122, TCS152
6400 W
Mode Back Panel
Passive
Bi-Amp
Connector Internal Schematic
speakON* NL4
PASSIVE, Input Full Range +
>
1+
NL4
1 - >
Input/
PASSIVE, Input Full Range - 1+ 2+ >
1-
Link
2 - >
2-
2+
Barrier Strip
>
1+
PASSIVE, Input Full Range -
Barrier
>
1 -
Strip
PASSIVE, Input Full Range +
2+ >
Input/
2 - >
Link
1+ 1- 2+ 2-
Connector Internal Schematic
speakON* NL4
PASSIVE, Input Full Range +
>
1+
NL4
>
1 -
Input/
1+ >
PASSIVE, Input Full Range - 1- 2+
Link
2 - >
2-
2+
Barrier Strip
>
1+
PASSIVE, Input Full Range -
Barrier
>
1 -
Strip
PASSIVE, Input Full Range +
>
2+
Input/
2 - >
Link
1+ 1- 2+ 2-
speakON* NL4
BI-AMP, Input Low +
>
1+
Amplifier Channel 1
NL4
>
1 -
1+ Input/
BI-AMP, Input Low - 1-
>
2+
Link
BI-AMP, Input High +
2- 2 - >
2+
Amplifier Channel 2
BI-AMP, Input High -
Barrier Strip
>
1+
BI-AMP, Input High -
Barrier
1 - >
BI-AMP, Input High +
Strip
BI-AMP, Input Low - >
2+
Input/
BI-AMP, Input Low +
2 - >
Link
1+ 1- 2+ 2-
Quick Start Guide 11
HPF
HF
LPF
LF
HPF
HF
LPF
LF
HF
LF