Turbosound TCS Passive Serie Guia De Inicio Rapido página 8

14 TCS Passive series
TCS Series Flying Components
Wall and Ceiling Brackets
To install a loudspeaker using Turbosound wall and ceiling brackets, fi rst separate the brackets into their wall/ceiling plate and speaker plate component parts.
Remove the countersunk bolts on the rear panel of the cabinet. Attach the speaker plate to the cabinet with the bolts supplied. Fix the wall/ceiling plate in the venue
using appropriate fi xings (not supplied). Lift the loudspeaker on to the wall plate and re-assemble the bracket parts, adjust the vertical angle and tighten all bolts.
Downfi ll Applications
The TCS62 can be mounted underneath a TCS122 or TCS152 cabinet to provide downfi ll coverage using
the TCS62-SB swivel bracket. First disassemble the swivel bracket into its component parts. Remove the
countersunk bolts from the bottom panel of the TCS152 cabinet and fi t the section with the elongated
holes using the fi xings supplied. Remove the countersunk bolts on the top panel and fi t the swivel bracket
using the supplied fi xings. Re-assemble the swivel bracket, angle as appropriate and tighten all fi xings.
To install the TCS62 in a ceiling-mount application, separate the component parts as above, and fi x the
top section to the ceiling with appropriate fi xings (not supplied). Fit the other half to the TCS62 cabinet,
re-assemble the bracket, angle as appropriate and tighten all fi xings.
Loudspeaker Arrays and Clusters
An array of two or more cabinets requires the use of kits of fl yplates and inter-cabinet couplers, which are fi xed to the cabinet sides through the M10 rigging points
and assembled together in a 'daisy chain' fashion to build up the required array. For all loudspeaker arrays consisting of two or more cabinets:
The number of inter cabinet coupler kits required = the number of boxes – 1, The number of fl yplate kits required = the number of boxes.
Illustrated here are the components parts available for TCS cabinets:
TCS62-SB (WH)
Swivel bracket for TCS62
TCS62-SB
Contents:
SWIVEL BRACKET
1 x Bracket
2 x M8 Bolts
2 x M8 Spring Washers
2 x M8 Flat Washers
TCS122-FP (WH)
Fly Plate Kit for TCS122
Contents:
2 x Fly Plates
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
TCS-FK1 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
Contents:
2 x ICC
TCS-FK2 (WH)
Inter-Cabinet Coupler Kit for TCS122 or TCS152
Contents:
2 x ICC
TCS152-FP (WH)
Fly Plate Kit for TCS152
Contents:
2 x Fly Plates
2 x M10 Bolts 4 x M10 Bolts
2 x M10 Spring Washers 4 x M10 Spring Washers
2 x M10 Flat Washers 4 x M10 Flat Washers
TCS115-FP (WH)
Fly Plate Kit for TCS115B
Contents:
2 x Fly Plates
4 x M10 Bolts
4 x M10 Spring Washers
4 x M10 Flat Washers
TCS-FK3 (WH)
Inter-Cabinet Coupler Kit for TCS115B
Contents:
2 x ICC
EB-10-40
Eyebolt M10 x 40mm
Contents:
1 x Eyebolt
Quick Start Guide 15