Grounding Instructions - Waring Commercial PRO PREP WCG75 Manual Del Usuario

11. To reduce the risk of injury, never place cutting blade on base
without first putting bowl properly in place.
12. Be certain cover is securely locked in place before operating
appliance.
13. Blades are sharp. Handle carefully. When not in use, store
blades only inside locked and secured work bowl.
14. The Pro Prep
processing blades with the designated work bowl (chopping
blade with chopping bowl or grinding blade with grinding bowl).
Using the Pro Prep
damage the unit and may result in injury.
15. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge.
Children should be supervised to ensure that they do not play
with the appliance.
SAVE THESE INSTRUCTIONS!

GROUNDING INSTRUCTIONS

For your protection, this appliance is equipped with a 3-conductor
cordset.
120-volt units are supplied with a molded 3-prong grounding-type
plug (NEMA 5-15P) and should be used in combination with a
properly connected grounding type outlet as shown in Figure 1.
If a grounding type outlet is not available, an adapter, shown in Figure
2, may be utilized to enable a 2-slot wall outlet to be used with a
3-prong plug.
As shown in Figure 3, the adapter must be grounded by attaching its
grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined that the
outlet cover plate screw is properly grounded. If in doubt, consult a
licensed electrician. Never use an adapter unless you are sure it is
properly grounded.
Chopper-Grinder is designed to use designated
®
Chopper-Grinder in any other way will
®
3