Installing The Pallet Scale - KERN UTEP Instrucciones De Operación

2.3

Installing the pallet scale

1. Place the pallet scale at the installation location. To move the pallet scale you can lift it with the
handle and roll it on the transportation wheels (1).
2. Check if a loading pin (4) is installed in each of the 4 rocker feet receivers (3) and load cells (2).
Do not apply torque to the load cells.
3. Check if all the springs (5) are hung on both sides of the foot.
4. Route the cable to the indicator in such a way that it is protected against damage.
5. For further steps refer to the KMN-TM/KME-TM indicator documentation.
11 UTEP/UTNN-BA-e-0913