Operation; Operational Limits; Loading/Unloading The Pallet Scale - KERN UTEP Instrucciones De Operación

3 Operation

3.1

Operational limits

The pallet scale is designed for an evenly distributed load.
▲ Avoid falling loads, shocks and lateral impacts.
▲ The forks of the forklift must not touch the pallet or the scale during weighing.
▲ Never move the scale when loaded.
3.2

Loading/unloading the pallet scale

Place the load on the scale with a hand pallet truck, crane or forklift. Make sure that the load is not
swinging when it is placed on the scale.
Remove the load by raising it by at least 10 cm above the scale before moving or repositioning.
UTEP/UTNN-BA-e-0913 12