Product Specifications - Philips WP3821/01 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
20
Problem
The
display suddenly
goes empty.
The appliance
makes a clicking
sound when I
use it at the
filtered spray
setting.

Product specifications

Product name and type
number
Type
Major filter components
Initial water flow rate
Solution
Perhaps the battery compartment cover is not
properly fitted. Reattach the battery compartment
cover in the correct way (see section 'Inserting the
battery' in chapter 'Preparing for use').
Perhaps the water purifier is set to the unfiltered
spray setting or the unfiltered stream setting. In
these cases, the display is off. The display only works
when the water purifier is set to the filtered spray
setting.
Perhaps the battery is low. Replace the battery.
Perhaps the filter cartridge is clogged and water flow
is extremely slow. Replace the filter cartridge.
The clicking sound comes from the built-in flow
meter and is normal.
Pure water on tap WP3821
Direct tap mount
Polysulphone hollow-fibre membrane and
granular activated carbon
2L/min. (water pressure at 1kgf/cm², water
temperature at 20°C)

Publicidad

Tabla de contenido
loading

Tabla de contenido