Handle removal
To move the refrigerator through a house door, it may be necessary to remove the
refrigerator door handles.
Loosen the set screws with a 2.5 mm (3/32")
Allen wrench and remove the handle.
Handle
reinstallation
Place the handle on the door by aligning handle footprints to fit mounting fasteners
and tighten the set screws with a 2.5 mm (3/32") Allen wrench.
16
NOTE
•
Handle appearance may vary from illustrations on this page.
Set Screw
Allen Wrench
NOTE
•
If the handle mounting fasteners need to be tightened or removed, use a 1/4"
Allen wrench.
Mounting
Fasteners
NOTE
If the handle mounting fasteners need to be tightened or removed use a 1/4" Allen
•
wrench
Mounting
Fasteners
Installation