Handle Removal - LG LSC 24971ST El Manual Del Propietario

Handle removal

To move the refrigerator through a house door, it may be necessary to remove the
refrigerator door handles.
Loosen the set screws with a 3/32" (2.5 mm)
Allen wrench and remove the handle.
Handle
reinstallation
Place the handle on the door by aligning handle footprints to fit mounting fasteners
and tighten the set screws with a 3/32" (2.5 mm) Allen wrench.
18
NOTE
• Handle appearance may vary from illustrations on this page.
Set Screw
Allen Wrench
NOTE
• If the handle mounting fasteners need to be tightened or removed, use a 1/4"
Allen wrench.
Mounting
Fasteners
NOTE
If the handle mounting fasteners need to be tightened or removed use a 1/4" Allen
•
wrench
Mounting
Fasteners
Installation