Attaching the front panel
Place hole A of the front panel onto the spindle
B on the unit, then lightly push the left side in.
Press (SOURCE) on the unit (or insert a CD) to
operate the unit.
Note
Do not put anything on the inner surface of the front
panel.
10
A
B
x
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
(With the card remote commander)
1
Press (MENU), then press
(DISC/PRESET) (+) or (DISC/PRESET) (–)
repeatedly until "CLOCK-ADJ"
appears.
1 Press (ENTER).
The hour indication flashes.
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to set the hour.
3 Press (SEEK) (+).
The minute indication flashes.
4 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to set the minute.
2
Press (ENTER).
The clock starts. After the clock setting is
complete, the display returns to normal play
mode.
Tip
When CLOCK mode is set to "ON," the time is always
displayed (page 21).