Descargar Imprimir esta página

ABB W2252 BL Guía Rápida página 7

Monitor de 4,3" manos libres

Publicidad

Idiomas disponibles

Idiomas disponibles

Q U I C K G U I D E
Operation
Video indoor station 4.3
1
2
3
4
5
No.
Description
1
4.3" display
Communication button
2
2A When a call is coming, press this button to activate the commu-
nication within 30 seconds and press again to end the call.
2B In standby status, press this button to enter the communication
screen.
2C In standby status, long press this button to activate broadcast
funciton (when multiple indoor stations are installed in the
same apartment).
The LED flashes slowly to indicate an incoming call.
The LED illuminates to indicate a conversation is during process.
The LED flashes fast, it means system is busy.
Unlock button
3
3A Open the door by pressing this button at any time.
6
7
3B Auto-unlock: the door is released automatically during an
incoming call. Long press this button for 10 seconds to enable/
disable the "Auto-unlock" function.
The LED illuminates to indicate auto-unlock.
The LED flashes fast, it means system is busy or door is released
exceeding the set time. (A sensor must be connected first)
4
Surveillance button
4A In standby status, press this button to surveil the default out-
door station.
4B When the screen is on, press this button to surveil next outdoor
station. (Function is available depending on the installation type)
4C When the screen is on, long press this button to snapshot
manually.
4D In standby status, if the LED flashes, press this button to dis-
play the "History" screen.
The LED flashes slowly to show the notification of the missing call.
5
Mute button
5A In standby status, press this button to mute the ringtone of this
indoor station.
5B In standby status, long press this button to mute the ringtone
of all indoor stations in the same apartment.
5C When a call is coming, press this button to reject the call.
5D During the conversation, press this button to mute the micro-
phone.
The LED illuminates to indicate mute status.
6
Programmable button 1
6A Default function of the button 1 is to release the 2nd lock con-
nected to the outdoor station.
6B In standby status, long press this button for 3 seconds to send
SOS alarm to guard unit. LED will flash slowly if successful.
6C Programmable for additional function, e.g. call guard unit,
intercom etc.
7
System setting button
Press this button to enter the system setting. LED flashes fast if
the system is busy.
7

Publicidad

loading