Teac W-1200 Manual Del Usuario página 20

Erasing already recorded tapes
You can erase a cassette tape by setting the recording level to the
minimum value (0) and recording silence.
After setting the REC LEVEL (recording level) knob to 0, follow the
recording procedures (page 18) to record.
(Skip recording level adjustment in step 3. Setting the recording
source is also unnecessary.)
20
Recording to cassette tapes (continued)
Creating silences (REC MUTE)
Erasing unnecessary parts and creating spaces between songs while
recording is possible.
If you press the REC MUTE (record muting) button when recording
or in recording standby, the unit records no signal for about 4 sec-
onds and then enters recording standby.
To create a blank of more than 4 seconds long
Hold down the REC MUTE (record muting) button for the desired
length of time.
Silence is recorded while you press the button. When you release
the button, the unit enters recording standby.
To create a blank of less than 4 seconds long
Press the PAUSE button within 3 seconds of pressing the REC MUTE
(record muting) button.
This stops the recording of silence and puts the unit in recording
standby.
Press the PAUSE button to resume recording.
blinks on the display while recording is muted.
o