GYS SPOT LIFT Manual De Instrucciones página 9

Ocultar thumbs Ver también para SPOT LIFT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
This instruction manual features indications on your device's operation and the precautions to observe for your safety.
Please read this throughly before first use and keep it handy for all your future needs.
PODUCT DESCRIPTION
The SPOT LIFT is a column mobile hydraulic jack, specifically designed to lift vehicles by the wheel. A 220 bar hydraulic
pump commands a hydraulic jack, a slide allows the jack to bring the load up or down. The SPOT LIFT allows working in
more ergonomic positions, by bringing the vehicle to shoulder height. The product's dimension and its 4 wheels allows
to move and manipulate the product really easily. Throught its design, it offers great stability to the load.
FUNCTION
This tool is meant for vehicle reparation: It wasn't designed to lift people. The SPOT LIFT must be used inside a working
area, protected from the elements (rain, humidity, wind, etc...). The weight of the structure and the maximum load
capacity are specified in this instruction manual. This tool was not designed for the user to operate from under the
vehicle. The lack of consideration regarding its intended function can lead to grave risks for the user and are under its
sole responsability. The user must use this tool in conformance with its function and must observe all the manufactuer's
instructions. The user must, among other things, observe the safety rules and risk prevention rules in the workplace.
The manufacturer GYS does not accept responsability regarding the damages incurred to persons and
objects that are the consequence of an incorrect, improper and dangerous use of the SPOT LIFT.
ASSEMBLY INSTRUCTIONS
The SPOT LIFT is a movable lifting tool and thus must be used on a surface protected from bad weather. It must be
used on a flat surface, perfectly evened and capable of sustaining the load. The use and transport on a rough surface
or similar preventing the good operation is strictly forbidden.
The described operations must be conducted by responsible experts. Before installation, it requires a
clean zone free of obstacles and constraints. If using a crane, observe the safety rules specific to the
crane's operations. Do not, under any circunstances, stand under the crane during manoeuvres.
SAFETY ZONE
For optimal safety, it is advised to define a zone in which objects or walls will be at distance. All manœuvres of descent,
exit and parking must be made with utmost vigilance from the operator. In the defined zone, there must be nobody.
+30cm
During the lifting phase, the SPOT LIFT product will advance of roughly 30cm towards the lifted vehicle.
It will reverse of the same distance during lowering phases. For safety reasons, the user must always
be able to escape during lifting and lowering phases.
-30cm
POWER SUPPLY AND CONNECTIONS
Montage pompe hydraulique / Hydraulic pump assembly / Montage der hydropneumatischen Pumpe / Montaje de la bomba
1
2
A
A
A
A
1xB
4xA
A
A
A
A
B
3
4
+
~ 40Nm
Once the column is fitted on the base, proceed with the assembly of the
hydraulic pump (see instructions provided with the pump).
~ 40Nm
5
6
Youtube Video
SPOT LIFT
73502_V3_19/01/2017
• During the first start, air will be confined in the hose and the jack. It is necessary to evacuate this air by lifting/
lowering the product load-free (without any load on the fork).
• Make sure that the hydraulic circuit is not leaking by lifting a load at low height.
SPOT LIFT
EN
9

Publicidad

Tabla de contenido
loading

Tabla de contenido