LaserLiner SuperCross-Laser 2P Manual Del Usuario página 7

5
4
11
3
Horizontal and vertical levelling
Release the transport restraint, set the ON/
OFF switch to „ON". The laser cross and the
two plumb lasers appear. The laser lines can be
switched individually with the selection button.
2
1
2
3
Always rotate the special pins into
!
their parked position for transport, see
illustration below. Otherwise there is
danger of injury.
12
13
Park
SuperCross-Laser 2P
6
7
8
9 10
Fasten
LASER LASER
1 Laser output windows
2 Laser-emitting window,
plumb laser
3 1/4" fastening screw
4 5/8" tripod threads with
threaded bush insert for 1/4"
photo-tripod threads
5 Special pins for direct
attachment to a wall
6 ON / OFF switch,
transport retainer
7 Laser line selection button
8 LED Status indicator
9 Hand receiver mode
10
LED Hand receiver mode
11 Holding magnets on the
back-side for attachment to
magnetic-responsive objects
12 Height adjustment knob
13 Tripod/wall bracket with
63 mm height adjustment
LASER LASER
07
EN