Rotating Bezel; Specifications - Seiko V110 Manual De Instrucciones

ROTATING BEZEL (for models with rotating bezel)
The rotating bezel can show up to 60 minutes of elapsed time.
l
1 Turn the rotating bezel to align its "
mark with the minute hand.
2 Read the number on the rotating bezel
that the minute hand points to.
Note: For some models, the rotating bezel rotates only counterclockwise.
16
"
Start
Elapsed time
30 minutes
have elapsed.

SPECIFICATIONS

1 Frequency of crystal oscillator ............. 32,768 Hz (Hz = Hertz ... Cycles per second)
2 Loss/gain (monthly rate)
For Cal. V110, V145, V181, V182 ...... ±20 seconds at normal temperature range
For Cal. V111, V114, V115, V116, V117, V137, V147, V157, V158, V187
3 Operational temperature range
For Cal. V110, V145, V181, V182 ...... –5 °C to 50 °C/ 23 °F to 122 °F
For Cal. V111, V114, V115, V116, V117, V137, V147, V157, V158, V187
4 Driving system ...................................... Step motor
5 Power supply ......................................... Manganese titanium-lithium rechargeable battery
6 Additional function
For Cal. V145, V147, V157, V158, V181, V182, V187
For Cal. V111, V117, V137 ................. Energy depletion forewarning function and over-
For Cal. V110, V114, V115, V116 ......... Overcharging prevention function
7 IC (Integrated Circuit) ........................... C-MOS-IC, 1 piece
• The specifications are subject to change without prior notice for product
improvement.
(5 °C to 35 °C/ 41 °F to 95 °F)
±15 seconds at normal temperature range
(5 °C to 35 °C/ 41 °F to 95 °F)
–10 °C to 60 °C/ 14 °F to 140 °F
Instant-start function, energy depletion forewarn-
ing function and overcharging prevention function
charging prevention function
17