Input Voltage - Vertilux VTi CELTIC RF Manual De Programación

Initial programming sequence
Before starting...
Ensure that the motor is compatible with the associated brackets or accessories and that it is
correctly installed.
Switch off the power supply.
Connect the motor according to the information in the table below and then switch the power
supply on.

Input Voltage

120V AC
6-700-CM-XXXXX
220V AC
6-700-CN-XXXXX
1
Select the desired remote control and channel.
2
Pair the motor with the remote control.
3
Check the direction of rotation of the motor
and change it if needed.
4
Set the upper limit.
The upper limit must always be set first.
5
Set the lower limit.
vertilux.com
2
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Neutral Live
White Black
Blue Brown
Ground
Green I Yellow
Green
UP OR
DOWN?