Description; Specifications - Tool - Burndy PAT4PC834-LI Instrucciones De Seguridad, Funcionamiento Y Mantenimiento

Use all appropriate personal safety equipment when
handling, operating, and servicing this tool such as: safety
shoes, hard hat, eye and ear protection, work gloves, and
sleeves.
WRONG
Certain small connectors when not properly positioned,
can severely damage this tool by becoming wedged
between the indenters and the tool head. See the figures
above for the correct placement of the connector.
To help ensure safe operation of this tool, keep all safety
labels clean and legible. Replace labels when necessary
with new labels. See the PARTS SECTION of this manual
for information on reordering.
This tool is protected by U.S. Patents: 7165439, 7111488, 6745611, 6668613, 7124619, 7066603, 6986274
USE
This tool is specifically designed for use with BURNDY®
Products. Use of non BURNDY® products with the tool
shall be deemed misuse or abuse.

DESCRIPTION

The BURNDY® PAT4PC834-LI is a battery powered crimp-
ing tool that can be operated with one hand allowing for
advance, retract, and hold functions for easier tool opera-
tion. The BURNDY® PAT4PC834-LI operates on a stan-
dard 18V Li-ion battery and comes complete with two bat-
teries and battery charger.
The PAT4PC834-LI tool uses dieless technology and off-
the-shelf connectors available world-wide. It will install a
RIGHT full range of splice and terminal connectors.
SPECIFICATIONS
PAT4PC834-LI
Output Force ........................ 6Ton (5.4 Metric Tons)
Weight .........................................13.85 lbs (6.28 kg)
Length ......................................... 17.05 in (43.3 cm)
Width ............................................... 2.95 in (7.5 cm)
Height .......................................... 15.21 in (38.6 cm)
Operating Voltage ........................................ 18 V-DC
Battery Recharge Time ............................. < 30 mins
3