Publicidad
Idiomas disponibles
Idiomas disponibles
Getting started:
Remove battery compartment cover off the base station and insert 2 x
AA size battery. Close the cover on the battery compartment again.
Battery compartment (D4) of the temperature sensor is located behind
the back cover. Insert 2 x AAA batteries while observing correct polarity
[ "+" and "–" marks] and close the cover on the battery compartment.
Place the base station securely on a flat surface.
The remote sensor should be securely mounted onto a horizontal
surface.
Note: Transmissions between receiver (station) and transmitter (sensor)
can reach up to 60m in an open area. In open areas there are no interfering
obstacles such as buildings, trees, vehicles, high voltage lines, etc.
Weather forecast function
Operation
After inserting batteries, or holding "WEATHER" button (B7) for 3
seconds, the weather icon flashes on the LCD. Enter the current
weather by pressing "▼" or "▲"button. Press the "WEATHER" button to
confirm the setting. The weather forecast may not be accurate if the
current weather entered is not correct. The weather station will start the
EN5
Publicidad
