Description; Specifications - Omnifilter WD1 Instrucciones De Instalación Y Funcionamiento

DESCRIPTION

The OmniFilter Hot and cold water dispensers use bottled water and
either heats or chills the water for dispensing.
Model WD1 is a floor model and has a non-refrigerated
compartment in the lower half of the unit. The storage area can be
used for cups, tea or similar items.
Model WD2 is a floor model and has a chiller compartment in the
lower half. The compartment should only be used to chill pre-packaged
drinks and food. It is NOT designed for storage of spoilable food or
leftovers.
Water Tank
Drain Cap
and Stopper
Figure 1 - Model WD1
Hot and Cold Water Dispenser
Bottle Support
Separator
Indicator Lights
Function Switches
Chilled Water Lever
Hot Water Lever
Drip Tray
Storage Compartment
Shelf

SPECIFICATIONS

Chilling Rate - WD1: 0.53 gallons (2 L) per hour
WD2: 0.26 gallons (1 L) per hour
Heating Rate: approx. 1.0 gallons (4 L) per hour
Capacity: 3 or 5 gallon bottle
Power Consumption: Heating: 441 watts max.
Cooling: 125 watts max.
Water Tank
Drain Cap
and Stopper
Figure 2 - Model WD2
Hot and Cold Water Dispenser with Chiller
Bottle Support
Separator
Function Display Panel
l
t a
g i Function Switches
D i
G (+ )
AT IN
HE
(-)
IN G
OL
CO
IR M
CO NF
G
TT IN
SE
Chilled Water Lever
W ER
PO
Hot Water Lever
Drip Tray
Chiller Compartment
Shelf
3
E
N
G
L
I
S
H