General Information - Dantherm DRC1 Manual De Instrucciones

General information

Operation
Press and hold for 10
seconds to reset the serial
number stored in DRC1.
Press and Hold for 3
seconds to enter
user menu setup.
Press and hold for 5
seconds to enter
installer menu.
Fail Condition
Locked remote
When the dehumidifier is running the dehumidifying symbol (
display .
When heating is toggled ON, the heating icon (
When the extractor fan is turned on, the extractor fan icon ( ) will be shown in the DRC1
display .
If the dehumidifier enters fail mode, the warning sign (
The DRC1 is equipped with switch in the battery compartment.
When switched to "lock" position, the buttons on the DRC1 become inactive.
The display will still update with information, but does not allow user inputs.
) is shown in the DRC1
)will be shown in the DRC1 display .
) will be shown in the DRC1 display .
EN
7