User Menu - Set Points - Dantherm DRC1 Manual De Instrucciones

EN

User menu - Set points

Dehumidifying set point
Press for 3 sec to enter
user menu setup.
Press to confirm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Temperature set point
Press for 3 sec to enter
user menu setup.
Press to confirm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
8
The humidity value and the dehumidifying icon will flash .
The display shows the desired humidity set point .
While flashing, the value can be increased or decreased by pressing Up/Increase or
Down/Decrease button on DRC1 .
Press enter to confirm humidity set point and go to next menu page .
The temperature value and the heating icon will flash .
The value displayed shows the desired temperature set point . While flashing, the value can
be increased or decreased by pressing Up/Increase or Down/Decrease button on the DRC1
Maximum: 34 °C, Minimum: 5 °C . Press enter to confirm new set point and go to next menu
page .